AN/APG-3
Description of the radar set, tactical-technical characteristics
Figure 1: Drawing of an airborne gun layer (AGL) type radar installed in the tail gun turret of a large bomber
Figure 1: Drawing of an airborne gun layer (AGL) type radar installed in the tail gun turret of a large bomber
Hersteller:General Electric
| Specifications | |
|---|---|
| frequency: | X band |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | |
| pulsewidth (τ): | 0.5 µs |
| receiving time: | |
| dead time: | |
| peak power: | |
| average power: | |
| instrumented range: | 8,000 yards (≙ 7,3 km) |
| range resolution: | |
| accuracy: | ± 12 yards; ± 0,25° |
| beamwidth: | |
| hits per scan: | |
| antenna rotation: | |
| MTBCF: | |
| MTTR: | |
AN/APG-3
AN/APG-3 was operating in the X band airborne gun layer (AGL), which would lock on a target and direct the turret guns of Boeing B-29 “Superfortress” and Convair B-36B “Peacemaker”. The APG-3 radar in the tail provided target range, azimuth, and elevation and angular speed relative to the bomber to the sighting station at the rear of the aft crew compartment.
The AN/APG-3 weights less than 300 Pounds and has a parabolic antenna only 12 Inches in diameter.
Work on the AN/APG-3 began at the end of 1943, and the system was given ground tests in the summer of 1944. As first modifikation, a display unit was developed to combine optical and radar gunsights. These modified devices were later renamed AN/APG-33.
Source:
- ‘Analysis of the automatic carrier controlled Approach System’, NRL-Report 3687, Washington D.C. May 25, 1950, p. 4