Flight Identification (FID)
Figure 1: Norwegian Junkers JU-52 seaplane
Flight Identification (FID)
Flight Identification (FID) is the identifier under which a flight is recorded in the flight plan and in air traffic control systems. It allows data received from radar or a transponder to be associated with a particular flight. The FID should not be confused with the aircraft's official registration mark: the same aircraft may use different flight identifications on different flights.
Every registered civil aircraft has an official registration mark consisting of a nationality mark and a registration mark. In Germany it begins with D- followed by four letters, for example D-ABCD. In the United States registration marks begin with N, followed by digits and, in some cases, letters. These marks are permanently displayed on the aircraft and do not change with the flight number.
Item 7 of the ICAO flight plan contains the Aircraft Identification. It may consist of no more than seven letters and/or digits; hyphens and spaces are not permitted. For scheduled flights, it usually combines the airline's three-letter ICAO designator with a flight number, for example KLM511, BAW213, or DLH651. The two-letter IATA designator, such as LH for Lufthansa, must not be confused with the three-letter ICAO designator DLH.
If a flight has no such airline designator, the aircraft registration mark may be used instead, without the hyphen, for example DABCD or 4XBCD. The radiotelephony call sign is related to this identifier, but it is not necessarily spoken letter by letter. Thus DLH651 is spoken as Lufthansa 651, while BAW213 is spoken as Speedbird 213.
A Mode S transponder can transmit the Aircraft Identification electronically. BDS register 2,0 is one of the registers used for this purpose. It provides eight character positions, although Item 7 of the ICAO flight plan allows only seven characters; unused positions are padded with spaces. The identification entered in the transponder must match that in the flight plan. If no flight plan is available, the aircraft registration mark is used instead. This enables air traffic control to associate the received Mode S data with the correct flight plan.
Sources:
- International Civil Aviation Organization (ICAO): Annex 7 – Aircraft Nationality and Registration Marks, Chapters 3 and 4: registration marks and their display.
- International Civil Aviation Organization (ICAO): Doc 4444 – Procedures for Air Navigation Services: Air Traffic Management (PANS-ATM), Appendix 2, Item 7: Aircraft Identification.
- International Civil Aviation Organization (ICAO): Annex 10 – Aeronautical Telecommunications, Volume IV: Surveillance Radar and Collision Avoidance Systems, Section 3.1.2.9.1: Aircraft Identification Reporting.
- International Civil Aviation Organization (ICAO): Doc 8585 – Designators for Aircraft Operating Agencies, Aeronautical Authorities and Services, ICAO three-letter designators and radiotelephony call signs.