History of the development of waveguides
In 1893,Sir Joseph John Thomson (born December 18, 1856, died August 30, 1940), a British physicist and Nobel Prize winner, first derived the electromagnetic modes in a cylindrical metal cavity.
In 1894,Sir Oliver Joseph Lodge (born June 12, 1851, died August 22, 1940), demonstrated the transmission of radio waves with a wavelength of 3 inches through a short copper tube.
In 1897,The first mathematical elaboration of these processes came from the British physicist Lord Rayleigh (born November 12, 1842, died June 30, 1919), who suggested removing the inner conductor from the coaxial cables already known at the time so that the electromagnetic wave, guided only by the outer wall, could propagate within it.
The concept was largely ignored for almost 40 years, as the focus was on lower frequencies.
In 1931, American high-frequency engineer George Clark Southworth (born August 24, 1890, died July 6, 1972) of Bell Laboratories began investigating waveguides for improving communications technology. He observed wave propagation in water-filled copper pipes and experimented with round waveguides. He suspected that there must be a special form of electromagnetic wave for this case and called it a transverse electromagnetic wave
In 1936,independently of Southworth's work, American electrical engineer Wilmer Lanier Barrow from the Massachusetts Institute of Technology (MIT) developed a modern rectangular waveguide. (Two years later, he invented the horn radiator.)
In 1936,In collaboration with Sergei Alexander Schelkunoff and John Renshaw Carson, American mathematician and electrical engineer Sallie Pero Mead discovered the transverse electromagnetic wave propagated by Southworth and published their findings in the Bell System Technical Journal in 1936.
1938 The invention of powerful microwave sources, such as the klystrons and magnetrons, enabled the first widespread use of waveguides. During World War II, they became a standard component in military radar systems.
Up to this time, there were no standards for waveguide dimensions.
Engineers and researchers built waveguides in the dimensions that were necessary for their devices or experiments.
In order to accelerate the production of radar components and connect assemblies from different manufacturers,
there was a need to standardize the dimensions of waveguides.
In 1946,the Electronic Industries Alliance (EIA) in the USA introduced the WR designations (“WR” stands for Waveguide Rectangular).
In 1946,the International Electrotechnical Commission (IEC) developed the IEC 60153 standard in parallel. In Europe, these are often designated with R numbers (e.g., R100 corresponds to WR-90).
Source:
- Karle S. Packard: “The Origin of Waveguides: A Case of Multiple Rediscovery”, IEEE Transactions on Microwave Theory and Techniques (Volume: 32, Issue: 9, September 1984)