www.radartutorial.eu www.radartutorial.eu Radar Basics

Radar systems with external coherence

Block diagram of a radar system with external coherence
Duplexer
Magnetron
Modulator
Synchronizer
Mixer stage
StaLO
Display
IF-Amp.
Phase
discriminator
tdelay
tdelay

Figure 1: Block diagram of a radar system using external coherence for moving target detection

Block diagram of a radar system with external coherence
Synchronizer
StaLO
Display
IF-Amp.
Phase
discriminator
tdelay
tdelay

Figure 1: Block diagram of a radar system using external coherence for moving target detection

Radar systems with external coherence

The principle of radar systems with external coherence is similar to that of systems with internal coherence (pseudo-coherent or fully coherent). The difference is that the phase of the coherent reference signal is not controlled by an internal coherent oscillator, but by a passive clutter echo, or the clutter echo itself is used as the reference signal. A circuit determines whether the phase difference between the echo from a target and the echo from a nearby stationary object remains constant or changes from pulse to pulse.

In principle, this arrangement is a conventional radar with a non-coherent transmitter, usually equipped with a magnetron. During signal processing, the IF signal is divided into two paths, one of which is delayed slightly by a delay line. The delayed signal component serves the same function as the reference signal in a fully coherent radar. A phase discriminator measures the phase difference between the two signals. If this phase difference remains constant from pulse to pulse, the phase discriminator produces only a DC component, which is suppressed during subsequent signal processing. If one of the two targets moves relative to the other, the output instead varies over time at the corresponding Doppler frequency. In the simplest case, the signal is presented acoustically through headphones.

If no stationary target is present at a suitable range near the moving target, a strongly regenerative amplifier can be inserted into the reference path between the delay line and the phase discriminator. This amplifier operates just below the threshold of self-oscillation. The most recent echo signal excites a damped oscillation in the amplifier, whose phase is determined by that echo signal. This ringing provides a phase reference for a short time. The circuit therefore acts like an oscillator synchronized by the echo signal.

External coherence was used in various older radar systems, including battlefield surveillance radars. One example is the portable AN/PPS-5A, which used a magnetron transmitter to detect moving targets based on their Doppler frequency. The signals were evaluated acoustically through headphones. External coherence was also used for moving target detection in the JPPS-P10. An airborne example is the Soviet early warning radar Liana, installed in the Tupolev Tu-126, an aircraft developed from the Tu-114. However, stationary clutter suppression based on this principle proved insufficiently reliable in this radar.