AN/TPQ-28
Description of the radar set, tactical-technical characteristics
| Specifications | |
|---|---|
| frequency: | X band |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | |
| pulsewidth (τ): | |
| receiving time: | |
| dead time: | |
| peak power: | 4 × 30 kW |
| average power: | 4 × 300 W |
| instrumented range: | 10 km |
| range resolution: | |
| accuracy: | 50 m |
| beamwidth: | |
| hits per scan: | |
| antenna rotation: | |
| MTBCF: | |
| MTTR: | |
AN/TPQ-28
The AN/TPQ-28 was a mortar locating radar that operated in the X band (IEEE designation) or I/J band (NATO designation). It was developed as early as 1967 to enable operators to accurately locate enemy mortar positions around their own position for the first time.
The system used four separate antenna groups, each covering an azimuth angle slightly over 90°, arranged in four directions. (Many publications incorrectly claim it was an omnidirectional antenna.) Each antenna group formed a frequency-controlled phased array, with each antenna controlled by a traveling wave tube. Radar signal processing used Northrop’s NDC 1051 24-bit-computer with 8 kByte of memory capacity.
Only three units were built. Unforeseen complications in automatic target processing and fixed clutter interferences caused a high false alarm rate, preventing the radar from being used as intended. It was later repurposed as a range-finding radar. The hardware was also utilized in the development of more successful mortar locating radars, such as the AN/TPQ-36.
Sources:
- John R. Johnson et al.: “Analysis of Tactical Intelligence Experience in Southeast Asia (U)” ADC005059.pdf, p. 320f
- Military History Branch, Office of the Secretary, Joint Staff Headquarters, USMACV, APO San Francisco: “Command History, 1969”, Volume III, p. 320f