www.radartutorial.eu www.radartutorial.eu Radar Basics

Magnetron Sputtering

Substrate
Target
Plasma cloud
Magnet
N
S
N
gas-tight
insulation
vacuum
pump
noble-gas
reservoir
High-voltage power supply

Figure 1: Schematic representation of a magnetron sputtering process

Magnetron Sputtering

Magnetron sputtering is a method for producing very thin material layers by deposition in a vacuum chamber at pressures ranging from 10−3 to 10−2 mbar. Sputtering, also known as cathodic sputtering, is a physical process in which atoms are ejected from a solid body, known as the target, by bombardment with high-energy ions and enter the gas phase. The material is thereby sputtered, subsequently deposited on a substrate, and forms a solid layer. The sputtering process is also referred to as a PVD process (Physical Vapor Deposition). The vacuum coating process provides a high degree of layer uniformity and purity. The coating source, or sputtering source, produces a low-pressure plasma from a noble gas, typically argon. The target located in the sputtering source serves as the source material for the layer. This process shares only its name with the magnetron used as a high-power tube for generating oscillations.

The main elements of the system are the cathode, which is the target, and the anode. Magnetic fields are installed behind the targets to increase the degree of ionization and consequently the deposition rate. This arrangement gives rise to the term magnetron. In this application, however, it is not used to generate high-frequency oscillations, because the resonators required for that purpose are absent. Due to the noble-gas filling, the system operates more like a thyratron. When a high voltage is applied, the discharge ignites and a plasma cloud forms. Within this plasma cloud, electrons are removed from the atoms of the gas, producing charged particles: negatively charged electrons and positively charged ions. As in a conventional magnetron used to generate high-frequency energy, the electric field produced by the high voltage and the magnetic field are perpendicular to each other. The magnetic field forces the charged particles to move along cycloidal paths parallel to the cathode, which in this case is the surface of the target. Under the influence of the high voltage, their motion becomes predominantly helical. The ions are accelerated toward the target. When they strike it, particles are ejected from the target material. These particles are deposited on the substrate to be coated, so that the layer grows there atom by atom.

This technology can be used to deposit all electrically conductive materials, including materials with high melting points. Insulating materials can also be sputtered and used as target materials. By varying the coating parameters in the magnetron sputtering process, the plasma conditions and therefore the properties of the layer can be adjusted over a wide range. The coating thickness can be controlled precisely. Typical layer thicknesses range from 1 nm to several μm. In addition, a wide variety of layer compositions can be set very accurately.

The sputtering process offers significant advantages over conventional processes, such as electroplating or simple vacuum evaporation. Compared with electroplating, one particular advantage is that it is a clean technology that completely avoids the use of environmentally harmful chemicals. This eliminates high operating and waste-disposal costs and provides a clean manufacturing alternative for functional surface finishing. Sputtering technology has reached a very high technical level and is also suitable as a manufacturing process for mass production.

Figure 2: F-22 Raptor with a gold-coated cockpit canopy
© 2008 Robert Shenk

Advantages of the process:

For radar technology, this process is mainly of passive significance, because, for example, glass can be provided with a conductive coating that prevents electromagnetic waves from penetrating it. This can be used for the glass panels of an air traffic control tower to protect air traffic controllers from RF radiation emitted by nearby radar stations. Cockpit canopies of aircraft with stealth characteristics can likewise be coated with a thin layer of gold to prevent uncontrolled reflections inside the cockpit.