www.radartutorial.eu www.radartutorial.eu Radar Basics

Radar J- Scope

A-scope
J-scope
“main bang”
pulse of the transmitted power
Target

Figure 1: Difference between the A-scope and J-scope

A-scope
J-scope
“main bang”
pulse of the transmitted power
Target

Figure 1: Difference between the A-scope and J-scope

Radar J- Scope

The J-Scope (also known as circular sweep scope) uses deflection modulation like the A-scope. This means, that the information about an amplitude change is displayed perpendicular to the temporal deflection. The difference between the two kinds of scopes is that the A-scope uses a linear deflection, and the J-scope uses a circular deflection. This provides a better resolution on the screen by using the same screen-size.

The deflection begins top at the screen and shows a pulse caused by the transmitter, the so-called “main bang” (or in German: “Senderzacken”). This is because the transmission power is so high that, despite all the protective circuits, sufficient energy reaches the highly sensitive receiver. Then the deflection drifts clockwise and the next pulse is the echo-signal. A scale is engraved at the screen for measuring the range. However, there were also versions with electronically generated range marks.

Since the development of displays with brightness modulation, this type of display is no longer used.

Picture gallery of J-scopes

Figure 2: crt type LB13/40 from the Würzburg system has an engraved scale of 0-40 km

J-scope: View of Groundclutter on a screen of Giant Wurzburg Radar

Figure 3: J-scope: View of Groundclutter on a screen of Giant Wurzburg Radar

J-scope used in the German airborne WW2- radar FuG 212 „Senderzacken”- pulse of the transmitted power Target

Figure 4: J-scope as used in the German airborne WW2- radar FuG 212