AN/PPS-1
Description of the radar set, tactical-technical characteristics
| Specifications | |
|---|---|
| frequency: | 10 GHz
(X band) |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | |
| pulsewidth (τ): | |
| receiving time: | |
| dead time: | |
| peak power: | |
| average power: | 30 mW |
| instrumented range: | |
| range resolution: | |
| accuracy: | |
| beamwidth: | 5° |
| hits per scan: | |
| antenna rotation: | |
| MTBCF: | |
| MTTR: | |
AN/PPS-1
AN/PPS-1 is operating in the X band continuous wave (CW) Doppler radar system that detects the presence of moving targets only. The radar has two antennas with a diameter of 18 inches, each with a beam width of 5 degrees. Moving objects are indicated acoustically in headphones. The magnitude of the audio frequency is a measure of the approach speed. For a slow pedestrian (1 mph), it is about 30 Hz, for a very fast vehicle (100 mph, ≙ 161 km/h), it is 3 kHz.
The equipment is divided into three units: the transmitter-receiver-unit which houses the RF components and the IF and Audio amplifier, and provides a plastic cover for the two 18-inch dishes; the power supply unit; and the battery box unit which contains a six-volt storage battery and a two-volt booster cell.
Source:
- Military Standardization Handbook, United States Radar Equipment Manual TM 11-487C-1 1965, p. 468f