www.radartutorial.eu www.radartutorial.eu Card Index of Radar Sets - Air Defense Radar

AN/SPS-42

Description of the radar set, tactical-technical characteristics

Figure 1: AN/SPS-42 aboard the USS Oklahoma City

Figure 1: AN/SPS-42 aboard the USS Oklahoma City

Specifications
frequency: 2 910 … 3 100 MHz
(S band)
pulse repetition time (PRT):  
pulse repetition frequency (PRF): 1 850 or 925 Hz
pulsewidth (τ): 2.5 or 4.6 µs
receiving time:  
dead time:  
peak power: 1 MW
average power:  
instrumented range: 160 NM (≙ 300 km)
range resolution:  
accuracy:  
beamwidth: 1.1° × 2.25°
hits per scan:  
antenna rotation: 15 or 6 r.p.m.
MTBCF:  
MTTR:  

AN/SPS-42

AN/SPS-42 is operating in the S band (IEEE designation) or in the E/F band (NATO designation) 3D air surveillance radar developed from the AN/SPS-39.

The transmitter output stage is a high-power klystron fed by two traveling wave tubes. The antenna is a frequency scanning phased array. The feeding is accomplished through a so-called snake feed located within the narrow vertical radome at the center of the antenna. Each winding of the waveguides features a slot radiator on both sides, allowing them to radiate one half of the reflector each.

This type of feed has the disadvantage that all the individual radiators emit equal power levels. As a result, the antenna produces relatively larger side lobes. The successor to this antenna replaces the individual radiators with an additional waveguide section that contains several slot radiators, allowing for a differentiated power distribution. The radar using new type of antenna is known as the AN/SPS-52.

Picture gallery of AN/SPS-42

Figure 2: Predecessor of the so-called snake feed