AN/APQ-113
Description of the radar set, tactical-technical characteristics
Figure 1: AN/APQ-113
Hersteller:General Electric
| Specifications | |
|---|---|
| frequency: | 16 000 … 16 400 MHz
(Ku band) |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | |
| pulsewidth (τ): | 0,4 µs |
| receiving time: | |
| dead time: | |
| peak power: | 65 kW |
| average power: | |
| instrumented range: | 40 NM (≙ 74 km) |
| range resolution: | |
| accuracy: | |
| beamwidth: | |
| hits per scan: | |
| antenna rotation: | |
| MTBCF: | 150 hrs |
| MTTR: | |
AN/APQ-113
AN/APQ-113 was operating in the Ku band (IEEE designation) or in the J band (NATO designation) multi-mode radar fitted in the F-111A/C/E aircraft. It was a late sixties fully analogue radar set and could operate in both air-to-ground and air-to-air mode.
The radar antenna used a parabolic reflector cut off in the lower part under a nose radome, which is mounted on a servo-controlled gimbal drive system, which in turn is mounted on a base that is stabilized in pitch and roll. The transmitter used a magnetron. It had no Doppler capability and was ineffective in clutter.