SCR-627
Description of the radar set, tactical-technical characteristics
Figure 1: Antenna of SCR-627
Manufacturer:U.S. Army Signal Corps
| Specifications | |
|---|---|
| frequency: | 200 MHz
(VHF band) |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | |
| pulsewidth (τ): | |
| receiving time: | |
| dead time: | |
| peak power: | 225 kW |
| average power: | |
| instrumented range: | 280 km |
| range resolution: | |
| accuracy: | |
| beamwidth: | |
| hits per scan: | |
| antenna rotation: | |
| MTBCF: | |
| MTTR: | |
SCR-627
SCR-627 was a medium-range stationary early warning radar operating in the VHF band
The antenna had dimensions of 10 × 10 m and was erected on a reinforced concrete foundation. It consisted of two superimposed antenna arrays, each with four rows of 6 dipoles in front of a common grid reflector. The phase difference of the echo signals from both antenna arrays was used to measure an elevation angle.
The radar used two PPI scopes and a special HR-scope (height-range scope) for display. For power supply, two gasoline generator sets (one spare) of 25 kVA each were used.