9ZW
Description of the radar set, tactical-technical characteristics
Figure 1: 9ZW
| Specifications | |
|---|---|
| frequency: | 2 700 … 2 900 MHz
(S band) |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | ≈ 250 Hz |
| pulsewidth (τ): | 2.3 µs |
| receiving time: | |
| dead time: | |
| peak power: | 2 × 750 kW |
| average power: | |
| instrumented range: | 200 NM (≙ 370 km) |
| range resolution: | |
| accuracy: | 300 m |
| beamwidth: | β= 2° ;ε= 1° |
| hits per scan: | |
| antenna rotation: | 10 rpm |
| MTBCF: | |
| MTTR: | |
9ZW
9ZW was operating in S band height finder radar.
The radar used as frequency diversity radar two transmitters, which transmitted successively in a frequency spacing of 50 MHz. The radar had the following operating modes:
- Mode Ⅰ: Searching at 10 revolutions per minute with a spiral elevation scan;
- Mode Ⅱ: classical manual height measurement with manually adjusted azimuth angle; measurement of approx. 6 targets per minute;
- Mode Ⅲ: semi-automatic (auto-lock) height measurement, manual target assignment, automatic measurement process, 15 expected measurement results of 15 different targets per minute. The antenna feed worked with conical scan for target tracking.
Source:
- Hans H. Jucker, „Zur Geschichte der militärischen Radaranwendungen in der Schweiz”, (online PDF)
