SBS-900
Description of the radar set, tactical-technical characteristics
Figure 1: SBS-900-4 uses an antenna combination including a 3.9 meter X-band antenna (lower beacon) and a 5.5 meter S-band antenna (upper beacon).
Figure 1: SBS-900-4 uses an antenna combination including a 3.9 meter X-band antenna (lower beacon) and a 5.5 meter S-band antenna (upper beacon).
| Specifications | |
|---|---|
| frequency: | X band |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | |
| pulsewidth (τ): | |
| receiving time: | |
| dead time: | |
| peak power: | |
| average power: | |
| instrumented range: | |
| range resolution: | |
| accuracy: | |
| beamwidth: | |
| hits per scan: | |
| antenna rotation: | |
| MTBCF: | |
| MTTR: | |
SBS-900
SBS-900 (Shore Based Sensor) is operating in the X band mast mounted and environmentally protected coastal surveillance radar system.
There are four variants:
- SBS-900-1, using a single X band radar transceiver with intrapulse modulation and digital pulse compression;
- SBS-900-2, using frequency diversity additionally;
- SBS-900-3, similar to SBS-900-2 but with dual redundant transceiver;
- SBS-900-4, dual band radar by using an additional S band-transceiver. The S-band antenna is mounted on top of the S-band antenna, 180 degrees from each other. The co-located antennas simultaneously transmit signals at both frequency bands.
Source:
- Manufacturers Leaflet
- Manufacturers home page
- Manufacturers press release