Scan-360
Description of the radar set, tactical-technical characteristics
Figure 1: Scan-360
(Courtesy of Ogier Electronics Ltd.)
| Specifications | |
|---|---|
| frequency: | 24 050 … 24 250 MHz
(K-Band) |
| pulse repetition time (PRT): | |
| pulse repetition frequency (PRF): | None (FMCW radar) |
| pulsewidth (τ): | |
| receiving time: | |
| dead time: | |
| peak power: | |
| average power: | 100 mW (EIRP) |
| instrumented range: | 200 m |
| range resolution: | |
| accuracy: | |
| beamwidth: | |
| hits per scan: | |
| antenna rotation: | 60 rpm |
| MTBCF: | |
| MTTR: | |
Scan-360
Scan-360 is operating in the K-Band low-cost ground surveillance radar designed to detect and track personnel and vehicles at up to 200 m in all directions. It automatically slews CCTV cameras to point at the intruder and integrates with a number of video management systems. Target co-ordinates are sent using the IP interface to third-party security systems.
Scan-360 utilises the license-exempt 24 GHz ISM frequency band. All signal processing is performed within the radar unit itself. A single Power-over-Ethernet connection is sufficient to provide power and data. Remote configuration of detection areas and radar settings is via a web browser interface. The mounting plate matches the standard 4-inch PCD used in the CCTV industry and the antenna elevation beam shape is designed for minimal blind spot underneath even when mounted on tall camera poles.
Source: