Description of the radar set, tactical-technical characteristics
|frequency:||2 880 MHz
|9 150 MHz
|9 040 MHz
|pulse repetition time (PRT):|
|pulse repetition frequency (PRF):||2 000 Hz|
|pulsewidth (τ):||0.5 µs|
|peak power:||150 kW||35 kW||2×35 kW|
|instrumented range:||30 NM
(≙ 56 km)
(≙ 37 km)
| 6 NM|
(≙ 11 km)
|hits per scan:|
|antenna rotation:||30 min-1||5.75 min-1|
The AN/FPN-1 (XN-2) is designed as a fixed ground radar system for airport surveillance, height finding, and for guiding aircraft for safe approach to the airport runway under all conditions of visibility.
Accurate and continuous information regarding the location of incoming aircraft with respect to the predetermined glide path is presented to the operators in the form of azimuth range and elevation data by the radar portion of the equipment. This information is translated by the radar set to lateral and vertical deviation from the selected glide path, and the pilot of the incoming aircraft is instructed verbally as to corrections he must make to keep on the glide path. Through these instructions the pilot is guided to a height of 75 feet or less above the runway and to within 50 ft of the runway's center line, enabling him to touch down under visual control in the usual manner.
The system consists of four separate radars:
- Search radar, rotating continuously
- Height finder
- precision approach, with two identically but rotated by 90° separate radars:
- course radar, and
- glide path radar.
The AN/FPN-1A is similar to the AN/FPN-1 except for component parts.
- MIL-HDBK-162A, 15 December 1965, Volume 1, Section 1, p.47 (online)